Elevator Cabin Zel Model
As a general feature, our ZEL model elevator cabin is designed by radius laminate coating
![LIFT-EXPO 2018 ALGERIA LIFT-EXPO 2018 ALGERIA.](https://aigtcc.com/wp-content/uploads/2019/07/zel-model-asansor-kabini-bsb-asansor-43092-5476903241-f.jpg)
As a general feature, our ZEL model elevator cabin is designed by radius laminate coating
Cabin Interior Covering | Horizontal radius laminate on 18 mm MDF |
Cabin Interior Accessories | Mirror Stainless Steel |
Cabin Interior Mirror | 1/3 2 pieces full height, 6 mm bisote mirror |
Cabin Floor | 20 mm Natural Granite |
Cabin Ceiling | Interior opening, mirror St. St., laser cut with indirect lighting |
Cabin Handrails | Double handrail stainless steel |
Cabin Ventilation | Square Fan 220V 12/12, upon request Special Fan 220 V 15/60 |
Interior coatings of our production ZEL model elevator cabin consists of radius laminate on 18 mm MDF. Radius laminate coatings are laid horizontal. Side walls of our elevator cabin designed with 3 pieces radius laminated coating . According to our customers’ request interior coatings color may be customized.
Between the radius laminate coatings, mirror stainless steel was placed as an accessory.
At the rear wall 2 pieces 1/3 full height 6 mm bisote mirror is used in our ZEL model elevator cabin.
In our ZEL model elevator cabin 20 mm special natural granite is used for flooring. According to our clients requests standard granite stone coating or PVC floor are also applicable.
In our ZEL model elevator cabin internal electrical installations and lighting are ready to use in the elevator ceiling. Our elevator cabin ceiling is designed as a hinged system easily opening from inside. In this way, the lighting in the ceiling of the elevator car can be easily modified without departing from the cabin. Elevator ceiling consist of laser-cut patterned stainless steel mirror.
Our elevator cabin interior handle consist of two pieces of stainless handrail. Thanks to the handrail fixation application, slackening problem of handrail can easily be solved by tighten the bolts from inside the elevator cabin. At the same time if needed it is possible to change the handrail from inside of the elevator cabin.
The ventilation holes consist on the cabin walls for the elevator cabin interior ventilation system. Withal there is a 220 V 12×12 square fan ventilation system in the cabin ceiling. More powerful 220 V 15/60 special square fan ventilation system is optional.
External plug-in system cabin walls provide easy installation opportunity during the installations. Standard bolted railing, skirt sheet, tube magnetic sheet, flexible chock connection sheet and railing foot bump sheet is delivered with our ZEL model elevator cabin.
ZEL model elevator cabin may be used in residential buildings, villa and commercial buildings.