TopGears ITG 135 Lift Machine Motor
The ITG 135 integrates the qualities of the “ITG 130” familiy of products, and it wraps up quality sturdiness and economy.
Product Detail:
TopGears ITG 135 Lift Machine Motor
Whatever you need, it does
Designed for any kind of application, it is a flexible traction unit capable to offer high speed travel as well as a very high load capacity especially when installed in 2:1 roping. The ITG 135 offers a variety of solutions for different motors, traction sheaves, and reduction ratios, thus allowing having a solution for any possible need.
MRL design installable in any position
The ITG 135 can be installed in vertical and horizontal position, thus allowing to satisfy any need of installation. When installed horizontally, it is possible to choose to have the screw shaft in the lower position, with the crown wheel on the top, a condition that produces the best possible lubrication also in maintenance speed, when almost any other machine would have to be operated only for a few seconds in order not to damage the not sufficiently lubricated gears. In addition, if your needs demand to store the hosting machines, the ITG 135 allows you to modify from right to left hand and viceversa in minutes, since it is enough to release four bolts to turn the motor and the complete brake system.
High static load features
With its 3400 kilograms the ITG 135 has the higher static load of it segment and is perfectly suitable for installations with heavy car frames and cabins and offers a level of safety largely higher than many of its competitors.
Safety as first
The ITG 135 has been conceived for meeting the highest possible safety standards. Designing the family of products ITG “130”, we had a clear target from the very beginning: no compromises about safety and quality. The bearings have been designed in order to assure a working life higher than that of similar machines that are normally considered at the top of reliability, the seals are made of Viton, the screw shaft is made of steel and is case hardened and tempered with individual control ensuring that there are no inclusions and cracks.
Each unit is exactly as the previous and the following one
Each and any ITG 135 is tested throughout by means of modern dynamometers ensuring that it meets the given working performance, and that each machine performes as for the given standards.
Lubricating oil exceeding the working life of many other hoisting machines
The lubrication of the ITG 135 is granted by a polyglygole synthetic oil that under normal working conditions requires replacement only after 20,000 hours, which means a length of time higher than the working life of may other similar machines.
Easy of maintenance
The ITG 135 has been designed in order to be really user friendly for its maintenance. The flywheel incorporating the brake drum and the traction sheave include a built in extractor that enables to remove them with no special tools. The brake arms incorporate a unique adjustment for the accurate centring of the brake shoes on the drum, thus producing a homogeneous wear of the brake liners and no noises. The flywheel allows adding additional disks for increasing the inertia whenever it could be necessary, but it can be easily removed for the ease of installation whenever there are space constraints for reaching the eventual machine room.
